청송소방서(서장 윤태승)는 공사장 용접 작업 중 화재 발생이 증가함에 따라 '용접 작업과 관련해 화재 예방'을 강조한다고 밝혔다.
작업자는 용접ㆍ용단 작업 전 건축물 안전관리자에게 작업장소를 사전 공지해야 한다. 이후 화재 예방을 위해 화재감시자를 지정ㆍ배치하고 현장위험성을 직접 확인한 후 물통, 불꽃받이 등을 비치해 사전 안전조치 의무를 이행해야 한다.
용접ㆍ용단 작업 중엔 가연성ㆍ폭발성ㆍ유독가스 발생과 산소 부족 여부를 지속해서 확인해야 한다. 마지막으로 용접 중 남은 불씨가 화재를 일으킬 확률이 높기 때문에 작업 후 작업장 주변에 불씨가 남아있는지 최소 30분 이상 확인해야 한다.
소방서 관계자는 “소방서의 노력도 중요하지만 결국 화재를 막기 위해선 공사장 관계자가 관심을 갖고 안전수칙을 준수해 화재 예방을 실천해야 한다”고 전했다.
Cheongsong Fire Station (Director Yoon Tae-seung) said it emphasizes "prevention of fire in relation to welding work" as the number of fires increases during welding work at the construction site.
The worker shall notify the safety manager of the building of the work place in advance before welding or welding work. After that, fire monitors should be designated and deployed to prevent fires, and water bottles and flame holders should be installed to fulfill their obligations for safety measures in advance.
During welding and welding operations, combustible, explosive, toxic gas generation, and lack of oxygen should be continuously checked. Finally, since the remaining embers during welding are likely to cause a fire, it is necessary to check for at least 30 minutes of embers left around the workplace after work.
A fire department official said, "The fire department's efforts are important, but in order to prevent fires in the end, construction officials should pay attention and follow safety rules to practice fire prevention."
임성철 기자 tkonnews@naver.com